|
BMW Convertible Top Tension Straps Last Updated: 08/10/2016 |
When opening your convertible top you should not have to push the rear window section down by hand. Although you cannot see them without removing the top or headliner, there is a pair of nylon tension straps that pull tighten together when open the top which allows the rear window bow to retract enough so the window and rear of the convertible top clear the top lid without you have to do anything by hand. These tension straps will lose their elasticity over time. Or, the front or rear loops may break. Failure may cause damage to your convertible top and void your warranty. So, we recommend replacement when you change your BMW convertible top. When opening your convertible top you should not have to push the rear window section down by hand. Although you cannot see them without removing the top or headliner, there is a pair of nylon tension straps that pull tighten together when open the top which allows the rear window bow to retract enough so the window and rear of the convertible top clear the top lid without you have to do anything by hand. These tension straps will lose their elasticity over time. Or, the front or rear loops may break. Failure may cause damage to your convertible top and void your warranty. So, we recommend replacement when you change your BMW convertible top. Although it may be possible to reuse your existing tension straps, we highly recommend you purchase new straps when replacing a convertible top for the BMW 3 Series. Used tension straps are subject to stretching over time and will wear out faster than your new convertible top. HOW TO INSTALL:Fold sides of top up to expose the straps on each side. Remove the fasteners holding the straps to each bow and replace the straps with the improved parts. Check and lubricate the pivot points and the rollers on the bow above the rear window for freedom of movement. 1987-1993 BMW Tension Strap | 1994-1999 BMW Tension Strap |