|
|
|
|
TWILLFAST RPC CLOTH - GLASS WINDOW - TOP AND WINDOW SECTION
Designed to fit the 1994-2004 model year Ford Mustang Cobra. This high quality convertible top will keep your Mustang looking its absolute finest. Includes a new heated glass window.
ABOUT THE WINDOW
New DOT rated glass window is bonded into the rear window section. From the exterior, the edge around the window has a clean, finished appearance with no piping needed to hide stitching, gluing or imperfections that may arise from other bonding methods. The fabric has been carefully notched by a computer controlled cutter around the radius to ensure proper adhesion around the entire perimeter to eliminate potential leaking. The technology is unique and protected by worldwide patents and we guarantee the bond to the original purchaser for the life of the vehicle.
ABOUT THE FABRIC
Haartz Twillfast RPC is considered an Acoustic topping and reduces noise. Acrylic face and polyester backing. Backing is black and has a Dobby (crosshatch) pattern. Haartz cloth topping materials are constructed using a three-ply method that has an acrylic or polyester/acrylic exterior (facing) and a cloth lining (backing). These materials are combined using an elastometric or rubber film that is sandwiched between them. This provides waterproofing and gives the material its stretch. Increasing the thickness of the rubber film will reduce the amount of noise in the vehicle interior. These thicker toppings are referred to as Acoustic and are becoming standard on most new cars.
In model years 2000-2004 Ford added a rubber weather seal sewn into the top that provides additional protection to the interior from the weather and some reduction to exterior road noise. This weather seal is sewn into all of our Mustang tops.
Mustang convertible top installation instructions.We have detailed installation images (69 in total) that you can download immediately after purchasing your new convertible top online. Below is an example page. You get a downloadable PDF with 69 images - two per 8.5' x 11" page. The pictures are highly detailed in full color showing the tools used and a step by step guide for removing and reinstalling this 1994-2004 Mustang 2 Piece Complete convertible top. The tools you will need include: - Heavy-duty Stapler + 6mm, 8mm, and 10mm staples.
- Various screwdrivers
- 12-point socket 13mm (see picture below).
- A 3' long, stiff wire (2.5mm diameter or so).
- Pliers & drill
- Contact cement spray adhesive (e.g. 3M Super Yellow)
PROP 65 WARNING: Cancer and Reproductive Harm— www.P65Warnings.ca.gov
|
|
|
|
|
|
|
|
Customers who purchased this item also viewed... |
|
|
|