PORSCHE BOXSTER CONVERTIBLE TOP

Fits all models between 1997 & 2002

HEATED GLASS WINDOW HAARTZ GERMAN A5 ORIGINAL TOPPING MATERIAL

This 1997-2002 Porsche Boxster convertible tops are manufactured in the USA using the original patterns and specifications. This convertible top is made with the original German A5 cloth topping material and includes a new heated glass window and electrical wiring harness.

WINDOW

Includes a new tinted glass window with embedded defroster wiring. The convertible top window bonding system provides an exceptionally clean look and extremely secure bond guaranteed to not fail for five years to the original owner.

FABRIC

Manufactured using premium Haartz German Sonnenland A5, a superior quality topping with dobby backing. The topping material is a three-ply composite made of acrylic twill weave outer fabric, a rubber inner layer, and a polyester lining fabric.

If you want to learn more about the topping material used in this item click here to go Porsche's supplier site, the Haartz Corporation. These Tops have been time-tested in hundreds of installations, which is why we feel comfortable providing a 100% guarantee that you will not have any problems with the fit.

1997-2002 Porsche 986 Boxster & Boxster S

Porsche issued Service Bulletin Group # 6-61 28 55 to address original design issues with certain early models that experienced embedded side cables pulling away from the top during normal use. Our replacement tops solved this issue with design improvements to the side cables and, unlike some competitors, we guarantee the cable stitching will hold under normal use for the warranty period of five years or we will replace your top at no charge.

This new Porsche Boxster convertible top includes detailed installation instructions that you can download immediately after completing your purchase.

How Does A Glass Window Fit into the Boot?

The 1997-2002 Porsche Boxster convertible tops were offered with plastic rear windows. You can purchase a replacement top with either an original style plastic window or a glass window similar to the 2003 and newer Boxsters.

The Boxster glass window is a DOT approved aftermarket window with the safety emblems and includes embedded defroster wiring and a wire harness kit to connect it to the vehicle's electrical system.

Like the newer Boxsters, the glass windows for the 1997-2002 Boxster are smaller than the plastic window. This is necessary since the larger plastic window folds when it is retracted into the top boot. And since a glass window does not fold it's size is 35.5" wide by 12'' tall to allow it to fit into the boot properly.

The trade-off is a slight loss in visibility because of the size and a big gain in clarity in your rear view mirror looking through glass compared to a plastic window that will discolor over time.

How to Connect the Wiring Harness

When you purchase the glass window convertible top from us, you receive a new rear window defroster wiring harness.

For all Boxsters sold in the US, with heated, electric mirrors there is a connector behind the seat belt harness on the driver's side where you can plug in the wiring harness.

One side of the wiring harness plugs into the window connector. On the other side there are two defroster connectors. One side is for negative and the other side for positive.

Just plug the harness to the window and connector behind the seat belt for it to work. The glass window defroster will activate when you turn on your mirror defroster. Do not turn on the defroster when the top is down to avoid build up of heat in the top boot.

PROP 65 WARNING: Cancer and Reproductive Harm— www.P65Warnings.ca.gov